Description
Sargent 60RX-8270-24V LNL 26D Fail Safe
This Sargent 60RX-8270-24V LNL 26D is a fail safe, finished in Satin Chrome (626/US26D). Configuration: 24V Electrified Mortise Lock, LN Rose, L Lever, LFIC Prep Less Core, RX Switch. The RX switch signals your access control system when someone exits from the inside.
About this mortise lock
A mortise lock fits a pocket cut into the door edge, which gives a stronger, longer-wearing lock than a bored cylindrical lock. The function sets how the lever, thumbturn and key behave, and most commercial mortise locks take a separate mortise cylinder or interchangeable core.
Features
- Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109")
- Springs High carbon steel
- Hubs for Knobs Sintered iron copper infiltrated
- Hubs for Levers Cold forged steel
- Hubs for Institutional Stainless steel (3- prefix)
- Auxiliary Deadlatch Stainless steel, non-handed
- Deadbolt One-piece hardened stainless steel, with 1" (25mm) projection
- Hand Specify hand on order; easily field reversible (if no hand is specified RH will be provided)
Specifications
| Brand | Sargent |
|---|---|
| Model / SKU | 60RX-8270-24V LNL 26D |
| Product type | Fail Safe |
| Series | 8270 Series Electrified Lever Mortise Locks |
| Finish | Satin Chrome – BHMA 626, US26D |
| Fail mode | Fail safe |
| Function | 70-Electrical Fail Safe |
| Lever/Knob Design | L - Lever |
| Rose/Escutcheon Design | LN Rose (2" Diameter) |
| Cylinder Type | Sargent LFIC Prep Less Core |
| Hand | Field Reversible |
| Door Thickness | 1-3/4" |
| Bolt Protection | 3/4" |
| Strike Number | 82-0110 |
| Strike Type | ASA |
| Strike Height | 4-7/8" |
| Strike Width | 1-1/4" |
| Screws | Combination |
| Power | Hard Wired |
| Operating Voltage | 12VDC/24VDC |
| Amp Draw | 500mA Peak, 15mA Holding |
| Switch Type | RX |
Questions and answers
Does it include a cylinder?
Many mortise locks ship without a cylinder so it can be keyed to your system. Check the specifications on this page, and we can supply a matching cylinder or core.
Will it fit my door?
Mortise locks need a mortise-prepped door with the right backset and faceplate size. Match the series and backset, or send us measurements.
Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.
