Norton CLP7500 690 Closer Plus Arm Door Closer, Dark Bronze Painted

Images may not represent actual product and finish.

Norton

Norton CLP7500 690 Closer Plus Arm Door Closer, Dark Bronze Painted Closer Plus Arm Door Closer, Adjustable Size 1-6, Dark Bronze Painted

$456.00 $960.00
(You save $504.00)
SKU:
CLP7500 690

Description

Norton CLP7500 690 Closer Plus Arm Door Closer

This Norton CLP7500 690 is a closer plus arm door closer, finished in Dark Bronze Painted (690/SP313). This version: Adjustable Size 1-6.

About this door closer

A door closer controls how a door closes and latches, so it shuts fully and safely after each use. Commercial closers have separate adjustments for closing speed, latching speed and backcheck, which slows the door if it is thrown open. The arm and mounting (regular, parallel or top jamb) depend on which side of the door the closer goes and whether you need hold open.

Features

  • Closers for interior and exterior doors shall be full rack-and-pinion type with cast aluminum alloy body.
  • Closers shall be surface mounted and shall project no more that 2-3/16" (55mm) from the surface of the door.
  • Closers shall be non-handed to permit installation on doors of either hand.
  • Closer fluid shall contain lubricity and anti-oxidation agents.
  • Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F.
  • Closers shall have multi-size spring power adjustment to permit setting of spring from size 1 through size 6.
  • Closers shall have two non-critical valves, hex key adjusted, to independently regulate sweep speed and latch speed.
  • Closers shall have backcheck cushioning controlled by a hex key adjusted valve.

Specifications

BrandNorton
Model / SKUCLP7500 690
Product typeCloser Plus Arm Door Closer
Series7500 Series Closers
FinishDark Bronze Painted – BHMA 690, SP313
TypeSurface
TechnologyHydraulic
Mounting LocationPush Side
Mounting StyleParallel Arm
Closer SizeAdj. 1 to 6
Arm TypeParallel Arm Heavy Duty
HandNon-Handed
Degree Swing85¼ to 110¼
StopPositive Stop
Back CheckAdjustable
CoverPlastic
Cold Weather FluidYes

Questions and answers

How do I pick the arm and mounting?
Regular arm mounts on the pull side; parallel arm mounts on the push side and is common on exterior and high-traffic doors; top jamb mounts on the frame stop. Hold open and cush arms add a hold-open or a stop.

What size closer do I need?
Size depends on door width, weight and location. Many closers are adjustable across sizes; check the specifications or ask us.

Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.