Description
Corbin Russwin CLX3350 AZD 626 Grade 1 Half Dummy Trim Cylindrical Lock
The Corbin Russwin CLX3350 AZD 626 is a grade 1 half dummy trim cylindrical lock, finished in Satin Chrome (626/US26D). Configuration: Armstrong Lever, D Rose, Non-Keyed, Non-handed.
About this lock trim
Lock trim is the visible lever or knob and its rose or escutcheon that mounts on a lock body. Trim packs are specific to the lock series and often to the function and hand, so they are used to replace worn trim or change the look without replacing the whole lock.
Features
- Exceeds 3,100 in-lb abusive locked lever torque with no entry while maintaining egress (2.6 times ANSI/BHMA A156.2 requirements)
- Exceeds 1,600 lbs offset lever pull with no entry for protection against attacks (8 times ANSI/BHMA A156.2 requirements)
- Latch retraction with 100lb preload (2 times ANSI/BHMA A156.2) while maintaining ANSI/BHMA requirements for operation in warped doors
- No access with minimum 100 vertical impacts for protection against vandalism attempts (20 times ANSI/BHMA A156.2 requirements)
- Lock chassis design supports all cylinder formats allowing flexibility for from fixed core to interchangeable core cylinders.
- Independent return springs allow lock to exceed ANSI/BHMA A156.2 Grade 1 cycle requirements without lever sag
- Innovative push/turn button design to withstand excessive abuse against door stops or walls.
- Lever Release™ freewheeling levers standard for vandal resistance; rigid lever optional.
Specifications
| Brand | Corbin Russwin |
|---|---|
| Model / SKU | CLX3350 AZD 626 |
| Product type | Grade 1 Half Dummy Trim Cylindrical Lock |
| ANSI/BHMA grade | Grade 1 |
| Finish | Satin Chrome – BHMA 626, US26D |
| Door Prep | ANSI/BHMA A156.115 |
| Door Thickness | 1-3/4" (44mm) - 2" (51mm) standard 1-3/8" (35mm) thick door, specify Quick Code D138 for Adapter plates Over 2" (51mm) up to 2-1/4" (57mm), specify Quick Code D214 |
| Minimum Stile | 4-1/2" (114 mm) |
| Handing | Non-handed |
| Backset | 2-3/4" (70mm) backset w/ 1-1/8" front (standard) 2-3/8" (60mm) backset w/ 1" wide front (specify Quick Code B238) 3-3/4" (95mm) backset w/ 1-1/8" front (specify Quick Code B334) 5" (127mm) backset w/ 1-1/8" front (specify Quick Code B500) |
| Latchbolt | Stainless steel, 1/2" (13mm) throw Optional: Brass, 3/4" (19mm) throw deadlocking fire latch for pair of doors (specify Quick Code M16) |
| Front | Wrought brass, bronze, or stainless steel Optional: rounded corners (specify Quick Code M13) 2-1/4" x 1-1/8" (57mm x 29mm) standard for 2-3/4" (70mm), 3-3/4" (95mm) and 5" (127mm) backset 2-1/4" x 1" (57mm x 25mm) standard for 2-3/8" (60mm) backset Accommodates flat doors and doors beveled 1/8" in 2" (3mm in 51mm) |
| Strike | Wrought brass or stainless steel ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center Optional strikes, lip lengths and ANSI wrought strike box available |
| Cylinder | Brass, 6-pin L4 keyway, 0-bitted standard |
| Keys | Two nickel silver change keys per lock standard |
| Masterkeying | Can be master keyed or grand master keyed Construction key systems available |
| Lead Lining | Lead provided between lockbody and spring housing (specify Quick Code M28) |
| Tactile Levers | Knurling (etching) or abrasive coating (surface tape) applied to backside of levers |
| Warranty | Ten-year limited |
| ANSI/BHMA | Certified ANSI/BHMA A156.2 (2017) Series 4000 – Grade 1 Certified ANSI/BHMA A156.41 |
| UL/cUL | UL listed to US and Canadian safety standards for 3 hour doors up to 4' x 10' (double doors require 41- option) |
| NFPA 80 | Conforms for life safety and property protection, Standard for Fire Doors and Other Opening Protectives |
| Positive Pressure | Meets ANSI/UL 10C, Positive Pressure Fire Test of Door Assemblies |
| ADA | All levers conform to ADA clear opening width requirements of ANSI A117.1 |
| California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) | All levers with returns comply; levers return to within 1/2" (13mm) of door face |
| Windstorm/Hurricane | All individual components of a total door opening are required to comply with each code. |
Questions and answers
Will this trim fit my lock?
Trim is specific to the lock series and function. Match the series on this page to the model on your lock, or send us a photo and we'll confirm.
Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.
