Arrow HK11-BB-630-CS Entrance Knob Lock, Satin Stainless Steel

Images may not represent actual product and finish.

Arrow

Arrow HK11-BB-630-CS Entrance Knob Lock, Satin Stainless Steel Entrance Knob Lock, BB Knob Trim Design, Schlage C Keyway, Satin Stainless Steel

$213.15 $435.00
(You save $221.85)
SKU:
HK11-BB-630-CS

Description

Arrow HK11-BB-630-CS Entrance Knob Lock

Arrow model HK11-BB-630-CS is an entrance knob lock, finished in Satin Stainless Steel (630/US32D). Configuration: BB Knob Trim Design, Schlage C Keyway.

About this cylindrical lock

A cylindrical (bored) lock installs through a round hole in the door and a smaller hole in the edge, so it is quick to install and replace. The function sets how the inside and outside levers or knobs lock, and the ANSI/BHMA grade indicates durability: Grade 1 is the heaviest duty.

Features

  • Door Thickness – 1-3/8" (35mm) to 2" (50.80mm)
  • Latch Front – Brass or stainless steel, 2-1/4" (57.15mm) x 1-1/8" (28.57mm), beveled 1/8" (3.17mm) in 2" (50.8mm)
  • Handing – Reversible.
  • Strike – Brass or stainless steel. ANSI A115.2,4-7/8" (123.82mm) x 1-1/4" (31.75mm) curved lip standard with a 1-1/4" (31.75mm) lip to center dimension.
  • Cylinder, Standard – Solid brass 6 pin cylinder supplied with two 6 pin nickel plated brass keys. Available in Arrow AR or Schlage CS keyway.

Specifications

BrandArrow
Model / SKUHK11-BB-630-CS
Manufacturer part numberHK11BB 32D CS
Product typeEntrance Knob Lock
SeriesHK Series Grade 1 Cylindrical Knob Locks
FinishSatin Stainless Steel – BHMA 630, US32D
Function11-Entrance
ANSI FunctionF109 - Entry/Office
Lever/Knob DesignB - Ball
Rose/Escutcheon DesignB - Rose
Cylinder TypeConventional Cylinder
Num Pins6
KeywayC
KeyingKeyed Different
Key(s)Cut
Num of Keys2
HandNot Handed
Thickness1-3/8" - 2"
Latch NumberQ71
Latch TypeDead Latch (Guarded)
Latch Backset Dim2-3/4"
Lock Face Size2-1/4" x 1-1/8"
Bolt Protection1/2"
Strike Number306
Strike TypeASA
Strike Height4-7/8"
Strike Width1-1/4"
ScrewsCombination

Questions and answers

Will it fit my existing door?
Most commercial cylindrical locks use a 2-1/8" bore with a 2-3/4" backset. Check the backset and door thickness in the specifications, or ask us.

Is it handed?
Most lever locks are field reversible. If the specifications list a hand, order the matching hand.

Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.