Norton P1601SS 689 Parallel Arm Door Closer, Aluminum Painted

Images may not represent actual product and finish.

Norton

Norton P1601SS 689 Parallel Arm Door Closer, Aluminum Painted Parallel Arm Door Closer, Adjustable Size 3-6, Stainless Steel, Aluminum Painted

$825.00 $1,075.00
(You save $250.00)
SKU:
P1601SS 689

Description

Norton P1601SS 689 Parallel Arm Door Closer

This Norton P1601SS 689 is a parallel arm door closer, finished in Aluminum Painted (689/SP28). This version: Adjustable Size 3-6.

About this door closer

A door closer controls how a door closes and latches, so it shuts fully and safely after each use. Commercial closers have separate adjustments for closing speed, latching speed and backcheck, which slows the door if it is thrown open. The arm and mounting (regular, parallel or top jamb) depend on which side of the door the closer goes and whether you need hold open.

Features

  • Closers for interior and exterior doors shall be full rack-and-pinion type with cast aluminum alloy shell.
  • Closers shall be surface mounted and shall project no more that 2-7/8" from the surface of the door.
  • Closers shall be non-handed to permit installation on doors of either hand.
  • Closer fluid shall contain lubricity and anti-oxidation agents.
  • Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F.
  • Closers shall have multi-size spring power adjustment to permit setting of spring from (1 through 4) or (3 through 6).
  • Closers shall have two non-critical valves, hex key adjusted, to independently regulate sweep and latch speed.
  • Closers shall have adjustable backcheck cushioning controlled by a hex key adjusted valve.

Specifications

BrandNorton
Model / SKUP1601SS 689
Product typeParallel Arm Door Closer
Series1601 Series Closers
FinishAluminum Painted – BHMA 689, SP28
TypeSurface
TechnologyHydraulic
Mounting LocationPush Side
Mounting StyleParallel Arm
Closer SizeAdj. 3 to 6
Arm TypeParallel Arm
HandNon-Handed
Back CheckAdjustable
Cold Weather FluidYes

Questions and answers

How do I pick the arm and mounting?
Regular arm mounts on the pull side; parallel arm mounts on the push side and is common on exterior and high-traffic doors; top jamb mounts on the frame stop. Hold open and cush arms add a hold-open or a stop.

What size closer do I need?
Size depends on door width, weight and location. Many closers are adjustable across sizes; check the specifications or ask us.

Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.