Description
Arrow RL11-SR-26D-IC Entrance Lever Lock
Arrow model RL11-SR-26D-IC is an entrance lever lock, finished in Satin Chrome (626/US26D). This version: SR Lever Trim Design, SFIC Prep Less Core.
About this cylindrical lock
A cylindrical (bored) lock installs through a round hole in the door and a smaller hole in the edge, so it is quick to install and replace. The function sets how the inside and outside levers or knobs lock, and the ANSI/BHMA grade indicates durability: Grade 1 is the heaviest duty.
Features
- Construction – Cold rolled steel with zinc dichromate finish for corrosion resistance. Requires standard 2-1/8" (53.97mm) bore through door.
- Backset – 2-3/8" (60.31mm) or 2-3/4" (69.85mm)
- Door Thickness – Fits 1-3/8" (34.93mm) to 1-3/4" (44.45mm) doors standard.
- Latch – Brass 1/2" (12.7mm) throw, UL Listed, guarded latchbolt on all locking functions
- Latch Front – 1" x 2-1/4" (25.40mm x 57.15mm) for 2-3/8" backset (60.32.mm) or 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset.
- Strike – 4-7/8" ANSI (123.83mm), 2-3/4" (69.85mm) T strike, or 2-1/4" (57.15mm) full lip strike.
- Cylinder – Solid brass 6 pin. Arrow "A" keyway standard. Available in Schlage CS keyway and other competitive keyways.
- Keys – 2 brass keys Handing – Non-handed
Specifications
| Brand | Arrow |
|---|---|
| Model / SKU | RL11-SR-26D-IC |
| Manufacturer part number | RL11SR 26D IC |
| Product type | Entrance Lever Lock |
| Series | RL Series Grade 2 Cylindrical Lever Locks |
| Finish | Satin Chrome – BHMA 626, US26D |
| Function | 11-Entrance |
| ANSI Function | F109 - Entry/Office |
| Lever/Knob Design | SR - Sierra |
| Rose/Escutcheon Design | 3-5/16 In. Diameter |
| Cylinder Type | SFIC Prep Less Core |
| Hand | Not Handed |
| Thickness | 1-3/8" - 1-3/4" |
| Latch Number | R71 |
| Latch Type | Dead Latch (Guarded) |
| Latch Backset Dim | 2-3/4" |
| Lock Face Size | 2-1/4" x 1-1/8" |
| Bolt Protection | 1/2" |
| Strike Number | R62 |
| Strike Type | ASA |
| Strike Height | 4-7/8" |
| Strike Width | 1-1/4" |
| Screws | Combination |
Questions and answers
Will it fit my existing door?
Most commercial cylindrical locks use a 2-1/8" bore with a 2-3/4" backset. Check the backset and door thickness in the specifications, or ask us.
Is it handed?
Most lever locks are field reversible. If the specifications list a hand, order the matching hand.
Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.
