Norton 7213MPSO RH 24VDC 689 Electromechanical Closer, Aluminum Painted

Images may not represent actual product and finish.

Norton

Norton 7213MPSO RH 24VDC 689 Electromechanical Closer, Aluminum Painted Electromechanical Closer, Slave/Support Unit, Selective Hold Open, Size 3, Rigid Slide Arm & Track, RH, 24VDC, Aluminum

$2,033.03 $3,049.00
(You save $1,015.97)
SKU:
7213MPSO RH 24VDC 689

Description

Norton 7213MPSO RH 24VDC 689 Electromechanical Closer

The Norton 7213MPSO RH 24VDC 689 is an electromechanical closer, finished in Aluminum Painted (689/SP28). Configuration: Slave/Support Unit, Selective Hold Open, Size 3, Rigid Slide Arm & Track, RH. It operates on 24VDC.

About this door closer

A door closer controls how a door closes and latches, so it shuts fully and safely after each use. Commercial closers have separate adjustments for closing speed, latching speed and backcheck, which slows the door if it is thrown open. The arm and mounting (regular, parallel or top jamb) depend on which side of the door the closer goes and whether you need hold open.

Features

  • (Closer shall be installed in the header of the frame, and the slide track mortised into the door’s top rail).
  • Closer unit shall be hydraulic, full rack and pinion type with a cast aluminum alloy shell.
  • Hydraulic fluid shall be non-gumming and non-freezing.
  • Closer unit shall have two non-critical valves to independently regulate closing and latch speed.
  • It shall also have an adjustable backcheck with a hex-key.
  • Closer unit shall have spring power adjustment to permit a 50% increase in closing power over the minimum closing force for any size.
  • Unit to be fail safe and must close the door during any electrical power interruption to the unit.
  • (Closer/Holder to be Executive Door Holder/Release with release actuated by battery operated hand-held controller).

Specifications

BrandNorton
Model / SKU7213MPSO RH 24VDC 689
Product typeElectromechanical Closer
Series7200 Series Electromechanical Closers
FinishAluminum Painted – BHMA 689, SP28
Voltage24VDC
ConfigurationSlave/Support Unit, Selective Hold Open, Size 3, Rigid Slide Arm & Track, RH, 24VDC, Aluminum

Questions and answers

How do I pick the arm and mounting?
Regular arm mounts on the pull side; parallel arm mounts on the push side and is common on exterior and high-traffic doors; top jamb mounts on the frame stop. Hold open and cush arms add a hold-open or a stop.

What size closer do I need?
Size depends on door width, weight and location. Many closers are adjustable across sizes; check the specifications or ask us.

Questions about fit, finish or keying? Call Security Lock Supply at (877) 202-8118.