Description
J8301 690 Norton Door Controls Door Closer
- Finish: 690/US20
- Series: 8301 Series Closers
- Type: Door Closers and Operators
- Sub Type: Door Closer
| Type | Surface |
| Technology | Hydraulic |
| Mounting Location | Push Side |
| Mounting Style | Top Jamb |
| Closer Size | Adj. 1 to 6 |
| Arm Type | Regular Arm |
| Hand | Non-Handed |
| Degree Swing | 150¼ |
| Back Check | Adjustable |
| Cover | Plastic |
| Reveal Size | 2-3/4" to 7" |
| Cold Weather Fluid | Yes |
The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market. With features such as staked valves, precise valve adjustment and a complete range of arm and cover options, this closer can meet virtually any application challenge. The 8000 Series Door Closers exceed 10 million cycles, have a rack and pinion design with a cast aluminum body and are non-handed. A slim-line plastic cover is standard with the 8301 closer and a full plastic cover is standard with the 8501 closer.
The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market.
With features such as staked valves, precise valve adjustment and a complete range of arm and cover options, the 8000 Series closer can meet virtually any application challenge.
- Closers for interior and exterior doors shall be full rack-and-pinion type with cast aluminum alloy shell.
- Closers shall be surface mounted and shall project no more than 2-1/8" from the surface of the door with standard cover.
- Closers shall be non-handed to permit installation on doors of either hand.
- Closer fluid shall contain lubricity and anti-oxidation agents.
- Closer fluid shall maintain stable viscosity to allow door closer to perform in temperatures ranging from extremely high to as low as -40°F.
- Closers shall have multi-size spring power adjustment to permit setting of spring from size 1 through size 6.
- Closers shall have two non-critical valves, hex key adjusted, to independently regulate sweep speed and latch speed.
- Closers shall have adjustable backcheck intensity controlled by a hex key adjusted valve.
- [Closers shall have adjustable delayed action closing controlled by a hex key adjustable valve.]
- Regular arm and top jamb closers shall have a non-hold open shoe permitting 15% ( + or – 7-1/2% ) power adjustment.
- **Closers shall be enclosed in a [molded resin cover] [plated or sprayed metal cover]
- Closers to be Norton® [8301/8501] [8501M] [8501MA] [8501A].
