Categories

ND50BD SPA 626 Schlage Lock Cylindrical Lock

Images may not represent actual product and finish.

ND50BD SPA 626 Schlage Lock Cylindrical Lock Entrance or Office Lock, Grade 1, Cylindrical Lock, SFIC Prep Less Core, Sparta Lever, Satin Chrome

$438.00 $795.00
(You save $357.00)
SKU:
ND50BD SPA 626

Description

ND50BD SPA 626

  • Finish: 626/US26D
  • Series: ND Series Lever Locks
  • Type: Locks, Cylinders, Cores, Keyblanks
  • Sub Type: Cylindrical Lock
Function
50-Entrance Office Lock
ANSI Function
F82 - Entry
Lever/Knob Design
SPA - Sparta
Rose/Escutcheon Design
3-7/16 In. Diameter
Cylinder Type
SFIC Prep Less Core
Hand Not Handed
Thickness 1-5/8" - 2-1/8"
Latch Number 13-247
Latch Type Dead Latch (Guarded)
Latch Backset Dim 2-3/4 In.
Lock Face Size 2-1/4 In. x 1-1/8 In.
Bolt Protection 1/2"
Strike Number 10-025
Strike Type ASA
Strike Height 4-7/8"
Strike Width 1-1/4"
Screws Combination

The Schlage ND Series is a Grade 1 Cylindrical Lock that is easy to service and maintain. The ND Series Vandlgard is ideal for areas subject to abuse or anywhere vandalism is likely to be present. All ND Levers are reversible and ADA Compliant.

A proven, easy to install product with extensive function, keying, trim and finish capabilities that work in nearly any application.

The Schlage® ND family significantly exceeds BHMA Grade 1 requirements for cycle, hammer blow, lever torque, lever pull and other tests. This means confidence that the lock will last, whether the application calls for high abuse resistance or just operation over millions of cycles—without any degradation in performance.

  • Handing: All ND-Series lever locksets are non-handed.
  • Door Thickness: 1 5/8” to 2 1/8” (41mm–54mm) standard including Vandlgard® functions. 1 3/4” - 2” for function ND85. See accessories for spacers required for 1 3/8” doors.
  • Backset: 2 3/4” (70 mm) standard. 2 3/8”, 3 3/4” and 5” (60 mm, 95 mm, 127 mm) optional.
  • Faceplate: Brass, bronze or stainless steel. 1 1/8” x 2 1/4” (29 mm x 57mm) square corner, beveled.
  • Lock Chassis: Zinc plated for corrosion resistance.
  • Latch Bolt: Steel, 1/2” (12mm) throw, deadlocking on keyed and exterior functions. 3/4” (19 mm) throw anti-friction latch available for pairs of fire doors.
  • Exposed Trim: Levers: Pressure cast zinc, plated to match finish symbols.
  • Roses: Brass, bronze or zinc.
  • Strike: ANSI curved lip strike 1 1/4” x 4 7/8” x 1 3/16” lip to center standard. Optional strikes, lip lengths and ANSI strike box available. See page 21.
  • Cylinder & Keys: 6-pin Everest 29 S123 keyway standard with two patented nickel silver keys per lock.
  • Keying Options: Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying.
  • Warranty: Ten-year limited for all functions including Vandlgard.