Description
RX2860-10G71-24V LL 26D Sargent Electric Cylindrical Lock
- Finish: 626/US26D
- Series: 10G70/71 Series Electrified Lever Locks
- Type: Electric Locks
- Sub Type: Electric Cylindrical Lock
| Function |
71-Electromechanical Fail Secure
|
| Lever/Knob Design | L - Lever |
| Rose/Escutcheon Design | L - Rose |
| Cylinder Type | Sargent LFIC Prep Less Core |
| Hand | Non Handed |
| Door Thickness | 1-3/4" to 2" |
| Latch Number | 10-3192 |
| Latch Type | Dead Latch (Guarded) |
| Latch Backset Dim | 2-3/4" |
| Lock Face Size | 2-1/4" X 1-1/8" |
| Bolt Protection | 1/2" |
| Strike Number | 808 |
| Strike Type | ASA |
| Strike Height | 4-7/8" |
| Strike Width | 1-1/4" |
| Screws | Combination |
| Power | Hard Wired |
| Operating Voltage | 24VDC |
| Amp Draw | 250mA |
| Switch Type | RX |
The Sargent 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.
The 10 Line is the standard for institutional applications.
A heavy duty electrified cylindrical key-in-lever handle lockset exceeds by nine times the Grade 1 standards. As for abusive force, this lock endures more than 1.5 times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.
- 10G70: Power off, unlocks outside lever
- 10G71: Power off, locks outside lever
- Deadlocking latch
- Key retracts latch
- Inside lever always allows egress
- Voltage requirements: 12VDC or 24VDC Regulated; always specify voltage
- 250mA at 24VDC or 500mA at 12VDC
- Provided with ElectroLynx® 8-Pin Connector
